Atkore Unistrut Channel Pre-Galvanized
Pre-Galvanised Atkore Unistrut Channel
Pre-Galvanised Atkore Unistrut Channel is for internal use only.Atkore Unistrut Channel is Pre-Galvanized (PG) to Z275- BS EN 10346 1.0244 standards.
We offer the Atkore Unistrut in the most common sizes; 41x41mm deep channel, 41x21mm shallow channel and but can also offer as 41x62mm, 41x82mm, 41x124mm, 41x165mm, which is available in either 3 or 6 metre lengths, with 11mm or 14mm wide slots depending on the profile.
The Atkore channel is manufactured from 2.5mm thick pre galvanised steel or 1.5mm thickness, suitable for indoor applications
Supplied with a zinc coating to a nominal coat of 20μm. All single Unistrut members are accurately and carefully rolled from mild steel. All multiple members are two or more single Unistrut members spot welded on.
The Atkore Unistrut Channel Metal Framing System incorporates a wide range of channel nuts and hardware (including: spring nuts, stud nuts, flat washers, square washers, lock washers, hex head cap screws, and more) meant to make fastening channel and fittings together as easy and as quick as possible
If you are looking for similar products from the Unistrut brand, you can find all product categories on the Unistrut main page
Free of charge technical team available to help find the correct product and solution as well as calculating loads and weights. Cutting Service available for Channel , we can cut any quality to your required length - simply contact us by Clicking Here