Unistrut Channel Pre-Galvanized

Unistrut Channel Pre-Galvanized

Plain Oil finish on Unistrut channel is an oiled finish that is applied to the raw material by the steel mill. The cold rolling process used to form Unistrut channel removes the excess of this oil and the residue provides a modicum of protection for the channel in storage. The plain finish on Unistrut fittings is that of the commercial bar stock input material. No surface treatment is applied to plain finish fittings, traditionally 

Plain Oil channel channels deliver a cost effective and efficient solution for all. Plain channels have no slots and holes in both the deep and shallow profiles to ensure profesUnistrut Pre-Galvanized (PG) to Z275- BS EN 10346 1.0244 standards. Supplied with a zinc coating to a nominal coat of 20μm All single Unistrut members are accurately and carefully rolled from mild steel. All multiple members are two or more single Unistrut members spot welded on The Unistrut Metal Framing System incorporates a wide range of channel nuts and hardware (including: spring nuts, stud nuts, flat washers, square washers, lock washers, hex head cap screws, and more) meant to make fastening channel and fittings together as easy and as quick as possible

Unistrut show that the standard is achieved by rolling the channel with the part number along with the full name of the Standard BS6946:1988, and there Unistrut branding. This is, as it should be, engraved deep into the Channel to ensure that you can clearly identify our product over the inferior product that is creeping into the market place

Visit Unistrut supplier shop for more information https://www.dpbuildingsystems.co.uk/unistrut or contact our technical team for free advice on 0121 706 7777 or technical@dpbuildingsystems.co.uk 

Or read our recently blog about our Unistrut cutting service Click Here