Unistrut Concrete Inserts

Back to Blog Listing

Unistrut Concrete Inserts

We hold the Unistrut Concrete Inserts and can cut to different sizes

Unistrut concrete inserts are manufactured from the standard Unistrut channel and may be installed in floors, walls, or ceilings for the support of all types of piping, conduit, cable support, and other industrial equipment.

Unistrut channel nuts can be positioned anywhere along the length of the channel, providing a means of attaching fittings or rods where required.

Unistrut inserts are available pre-filled with an easily removable foam to prevent the ingress of grout and cement.

Concrete inserts can be supplied in pre galvanized, hot dip galvanized and stainless steel finishes


P3270 inserts are designed to accommodate M6, M8, M10, M12 & M16 fixings.

Cutting positions are located between lugs as indicated (A) in increments of 200mm.

The recommended loading in average strength concrete* with a safety factor of 3, is: 

P3270     Pullout 8.8kN   Length 300mm


P3370 inserts are designed to accommodate M6, M8, M10 & M12 fixings. Cutting positions are located between lugs as indicated (A) in increments of 200mm

The recommended loading in average strength concrete* with a safety factor of 3, is: 

P3370    Pullout 6.7kN   Length 300mmm