UNISTRUT CURVED CHANNELPosted On: Wednesday 11th December 2019 Back to Blog Listing
UNISTRUT CURVED CHANNEL
We can provide Unistrut channel curved to your specifications. Curved channel is commonly used for Trolley applications, or for mounting to curved roofs, ceilings or walls. Below is a summary of our capabilities and limitations, as well as a form to request a quote.
◾Channel Options: P1000 (others may be available upon request)
◾Pierced Channel: Only solid channel, no piercings
◾Material and Finish Options: Plain (PL), Pre-Galvanized (PG) & Unistrut Defender (DF)
◾Minimum Radius: 3’ (to avoid damage to the channel and for trolley applications)
◾Useable Lengths: Up to 17’ arc length per channel◦20’ channel will result in 17’ of useable curved channel. For lengths greater than 17’, multiple curved sections are required. All curves must be field trimmed to achieve required arc length. Multiple sections must be field or shop welded for arc lengths exceeding 17’.
◾Manufacturing Tolerance: ±1/16”◦Each curve has a manufacturing tolerance of ±1/16” in the offset (factory gage setting) from the center of a 4’ chord. For multiple channels with the same required radius, each channel will vary within this tolerance. Therefore, no two sections will have the exact same final radius. The table below summarizes the curvature range for a given radius resulting from the manufacturing tolerance.
Please contact our dedicated Unistrut technical team for more information or help with your solution on firstname.lastname@example.org, 0121 706 7777 or by visiting their online suppliers shop - Click Here
We have the ability to register projects for better pricing with our suppliers, as well as offering bulk buying pricing, please contact our sales team on email@example.com or 0121 706 7777
For all new customers, we can offer an additional 5% discount on your first orders - just mention this post when calling in