fischer Ultracut FBS II Concrete screw LUL Approved

Back to Blog Listing

fischer Ultracut FBS II Concrete screw LUL Approved 

The fischer Ultracut FBS II Concrete screw is approved to be used on Transport for London Underground which is the latest product to be approved

FBS II is a high performance removable screw anchor for concrete and masonry 

Other LUL Approved Fischer products:-

fischer Resin Anchor R. 

fischer Resin bonded anchor R is suitable for anchoring of threaded anchor rods and internally threaded anchors in non-cracked concrete

fischer resin anchor R is vinyl ester glass capsule resin system suitable for non-cracked concrete. It can be installed in dry, wet and also flooded drill holes in accordance with fischer’s installation procedures. Systems can be used with both RG M anchor rods or internally threaded anchor RG MI. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations.

FFSC Firestop Compound

A fire seal for service penetrations in walls and floors. 

This gypsum based Firestop mortar is supplied as a dry powder which is mixed with water prior to application. Fischer Fixings FFSC Firestop Compound is fully compliant with the requirements of London Underground Standard 1-085 A2 ‘Fire Safety Performance of Materials’.

fischer FZA Zykon anchor

Undercut anchor suitable for steel connections in cracked or non-cracked concrete fischer Zykon FZA is an undercut anchor for fixing into cracked or non-cracked concrete, offering the highest safety. Fixing is available as bolt projecting, through type or internally threaded type, allowing pre-positioned or push-through installation in accordance with fischer’s installation procedures. Anchor is available in wide range of diameters in zinc plated, A4 stainless steel and also high corrosion resistance stainless steel. As this

is an undercut system, anchor and can be installed with small axial spacing and can be positioned close to free edges as per ETA specification. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations

fischer FH II High performance anchor

Torque controlled expansion anchor suitable for steel connections in cracked or non-cracked concrete fischer FH II is a high performance expansion mechanical anchor for fixing into cracked or non-cracked concrete. Can be installed as a through fixing in accordance with fischer’s installation procedures. Anchors are available in zinc plated and A4 stainless steel, with variety of different head types. Countersunk version FH II SK and internally threaded FH II-I are also available. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations.

fischer FBN II Anchor bolt

Torque controlled expansion anchor suitable for steel connections in non-cracked concrete.

fischer FBN II is an expansion mechanical anchor for fixing into non-cracked concrete. Can be installed as a through fixing in accordance with fischer’s installation procedures. Wide range of different diameters and lengths are available. Anchors are available in zinc plated and A4 stainless steel. Hot-dipped galvanised finish can be also offered but without ETA approval.

The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations. 

fischer FAZ II Anchor bolt

Torque controlled expansion anchor suitable for steel connections in cracked or non-cracked concrete

fischer FAZ II is a expansion mechanical anchor for fixing into cracked or non-cracked concrete. Can be installed as a through fixing in accordance with fischer’s installation procedures. Wide range of different diameters and lengths are available. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations. Anchors are available in zinc plated, A4 stainless and also high corrosion resistant stainless steel

fischer Highbond Anchor FHB II

Torque controlled bonded anchor suitable for applications in cracked or non-cracked concrete

fischer : Highbond resin anchor FHB II is used to fix Highbond anchor rods FHB II AS and FHB II AL into cracked or noncracked concrete. It is available as an injection resin FIS HB 345 S, resin capsule FHB II P or fast cure capsule FHB II PF. Anchor can be installed in dry or wet drilled holes, capsule can be installed also in flooded holes in accordance with fischer’s installation procedures. Anchor rods are available in various FHB II AS anchor rod allows through type installation with both injection and also glass capsule. FHB II PF capsule offers unique fast cure curing times of only 2minutes for temperatures above 20°C. The product has ETA and compliant with LU standard 1-085

fischer Superbond resin system

fischer Superbond resin

anchor FIS SB or RSB is suitable for anchoring of threaded anchor rods, internally threaded anchors or rebars in cracked or noncracked concrete.

fischer Superbond resin anchor is available as an injection resin FIS SB or resin capsule RSB. Injection mortar allows variable embedment depth; glass capsule system offer reduced curing times down to only 5 minutes for temperatures above 20°C.

Both systems can be used in dry or wet concrete, and capsule can be installed also in flooded holes in accordance with fischer’s installation procedures. Both systems can be used for fixing RG M or FIS A anchor rods, internally threaded anchor RG MI and FIS SB can be used also with rebar and rebar anchor FRA. The product has European Technical Approval ETA 12/0258, option 1. It is compliant with LU standard 1-085, and can be installed in sub-surface locations.

fischer FZEA II Zykon Hammerset anchor

Undercut hammerset anchor suitable for steel connections in cracked or non-cracked concrete

FZEA II is an undercut hammerset anchor with an internal thread for fixing into cracked or non-cracked concrete. Fixing is installed as a pre-positioned anchor directly into concrete in accordance with fischer’s installation procedures. Undercut holes are drilled with FZUB drill bit. FZED plus setting tool is required for correct anchor setting. After correct installation, setting tool marks the sleeve of the anchor with impression marks, allowing easy installation safety check. Anchor is available in M8, M10 and M12 diameters in zinc plated, A4 stainless steel and also high corrosion resistance stainless steel. 

As this is a true undercut system, anchor and can be installed with small axial spacing and can be positioned close to free edges as per European Technical Approval specification.

FIS V injection resin system

Fast curing, high performance, styrene free, hybrid vinyl ester resin.

Suitable for connections such as metal studs or reinforcement bars into non-cracked concrete.

Product has European

Technical Approval - ETA.

The product is compliant with LU standard 1-085, and can be installed in sub-surface locations

fischer FWB Wallbolt

Traditional Sheild Anchor for use in Brick, high strength block and non-cracked concrete.

fischer FWB is a traditional internally threaded segmented wall bolt. Fixing is installed as a pre-installed installation. The sheild finishes flush with the surface and can be combined with a bolt head ('L' loosbolt type) with thread and nut and washer ('P'projectiong type) or just the sheild so that a standard metric threaded bolt of the installer's choice can be used. Anchors Available only in zinc plated finish from M6 to M20 threads.

The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations.

fischer EA II Hammerset anchor

Deformation controlled expansion anchor suitable for steel connections in noncracked concrete

Can be used for multiple use for non-structural applications in cracked concrete. Additional info: EA II is a drop-in hammerset anchor with an internal thread for fixing into non-cracked concrete. Fixing is installed as a pre-positioned anchor directly into concrete in accordance with fischer’s installation procedures. EAW H Plus or EA II S-SDS setting tool is required for correct anchor setting. Anchor is available in M6-M20 diameters in zinc plated and A4 stainless steel. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface location

fischer FIS EM injection resin

High performance injection epoxy resin for structural connections of threaded studs and reinforcing bars to concrete and masonry

This epoxy injection resin system is supplied by fischer fixings 

Approved injection resin chemical anchor suitable for various applications where the maximum bond strength is required.

Ideal solution for diamond drilled or large diameter holes. ETA option 1 approval for cracked concrete and also ICC approvals available.

Insulator screw plug - Nylon Fischer S12 R100

For fixing conductor rail insulators to concrete sleepers

Specification: S-TR-0019 Part No. 914P1

DP Building Systems Ltd are a major stockist of LUL Approved Cable Management and Fixing solutions to the rail industry, for more information please visit our dedicated website - https://www.dpbuildingsystems.co.uk/hs2 

Contact our technical team on technical@dpbuildingsystems.co.uk for free advice and help on our LUL Approved products, solutions and suppliers.