Anchor IT

Anchor IT
Anchor IT - Product Categories: Concrete.
The range consists of a predetermined length of wire from 1 metre to 10 metres with a choice of Safe Working Load:
  • G 10kg SWL
  • S 35kg SWL
The system consists of wire and zip-clip with a ferruled CLA2 concrete anchor termination.
The Applications
Suitable for concrete applications including:
  • Reinforced concrete
  • Slagged concrete C15/C35
  • Solid brick
  • Compressive resistant stone
The Technical Information
  • Key free release system
  • Zinc plated pre-expanded through bolt
  • 30mm long
  • 5mm wide
  • 6mm head width
  • 30mm embedment depth
  • 5mm drill diameter required
  • High tensile galvanised wire 1960N/mm² grade 7 x 7 construction
  • BSEN 12385 standard
  • Vibration resistant
The Installation
  • Drill a 5mm hole to a minimum depth of 30mm
  • Blow the hole clean of dust and debris
  • Drive the anchor into the hole until the head is firmly seated against the base material. Be sure the anchor is driven to the required embedment depth.
  • Pass the wire through the zip-clip in the direction of the arrow
  • Pass through or around your require suspension and back through the zip-clip leaving 15cm of wire protruding.
  • Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrow indicated

Product Compare (0)


F-HF-320

£32.38

Pump House flexi-H-Frame Support 320mm 2 Black, Sq. Feet. H-frame kits to support ducts, pipes and electrical containment. The H-frame kits offer the installer full flexibility by providing a solutio..

F-HF-500

£90.00

flexi-H-Frame Support 500mm 2 Black, Sq. Feet + Fittings.H-frame kits to support ducts, pipes and electrical containment. The H-frame kits offer the installer full flexibility by providing a solution..

Showing 1 to 2 of 2 (1 Pages)