Zip-Clip Rize

Back to Blog Listing

Zip-Clip Rize.

The Specifics: 

The range consists of a choice of wire reels and zip-clips with a choice of Safe Working Loads: • G 15kg SWL •  S 50kg SWL •  Y 120kg SWL •  P 300kg SWL •  N 500kg SWL

The Applications 

•  Trunking and busbar solutions •  Trapeze bracket solutions •  Prefabricated module solutions •  Secondary light support solutions

The Features and Benefits 

•  Key free release system •  No pre-site visits required •  Ideal for long drop lengths •   Any spare material can be used  on following projects •  Only wire cutter required •   Can be used as a wrap around application and with a wide range of brackets. •   Wire supplied in dispensing box – avoiding risk of wire bird nesting •  Safety factor: 5:1

SUITABLE FOR:

•   Wrap around applications such as purlins or I-beams •   Use with a wide range of fixing brackets including: eyebolt adapters, concrete eyebolts, rib deck fixings, purlin clips • Trapeze Brackets •  Long suspensions •   Roof spaces with varied drop lengths •  Tight void spaces.

The Installation •  Cut wire to desired length for the drop required •   Pass one end of the wire through the zip-clip in the direction of the arrow and draw through enough wire to go around your fixing point •   Pass the wire end back through the zip-clip leaving at least 15cm of free wire protruding •   At the other end again pass the wire through the zip-clip in the direction of the arrow •   Pass the free end of wire around your suspension or through your fixing and back through the zip-clip leaving 15cm of wire protruding •   Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated

Zip-clips are also available in  a lockable version offering a  tamper proof installation. The Installation: •  Unscrew the M4 locking nut and bolt until the adjustment pin can  be pushed back fully •  Pass one end of the wire through  the zip-clip in the direction of the arrow and draw enough wire to go around your fixing point •  Pass the wire back through the  zip-clip leaving at least 15cm of  wire protruding •  Tighten the M4 locking nut and  bolt until the adjustment can no longer be moved.

If you would like more information or support, please contact our dedicated Zip-Clip technical team on technical@dpbuildingsystems.co.uk or to obtain supported project pricing please contact our Zip-Clip sales team on sales@dpbuildingsystems.co.uk or 0121 706 7777

Or click on their supplier shop for more information Click Here